Monday, November 15, 2010

FRONT DOOR makover FINALLY finished!

So happy to finally be done with refinishing my front door.  It is solid wood so I had to strip and sand and sand and sand and .... well you get the idea.  Then I had to stain over two days and then add a coat of spar urethane over the course of another two days.  Here is the result..... I love it!

Here are the dreadful BEORE pictures!  Several harsh Chicago winters totally took its toll on the door.  I was going to paint it black because I was not sure I would be able to get it from a honey oak to a dark mahogany.  The project was a little daunting but I figured I would give it a shot and if I ruined the door, I could THEN paint it.  So glad I took a chance.  


The first step was to use a chemical stripper and then re-strip and then sand, sand, sand and sand some more.  The stripper is nasty - had to wear chemical resistant gloves, a mask, eye protection and I still got a few chemical burns.  OUCH!  What a totally tedious job but I finally got it down to bare wood.  Behold the totally naked wood door - a glorious sight!



The next step was Wood Conditioner.  It is the equivalent of using foundation under your make-up.  It helps to even out the wood and allow for a more uniform stain color.  Here is the door after the conditioner was applied. 


After that was allowed to dry, I applied the first coat of stain.  Varathane Gel Stain - CABERNET.  It worked very well.  After the first coat, I was a little nervous that I would never get the dark color I had my heart set on.

After the application of a few more coats, I definitely had arrived at the color I had pictured in my mind.  I then added four coats of Spar arathane so it will hopefully be a long time until I have to do this project again.  I also removed the railing which made a HUGE difference!  I am thrilled!  This project cost me about $50 total for stains and supplies. 

Here are the supplies I used... 

I used a basic stripper from Menards.  Then after it was stripped and sanded, I used this - one of my favorite products!  Citristrip Paint Stripper After Wash!  I used white gauze to apply it.  It just washes off the residue from stripping and sanding and gives you a clean surface to work with.  The door felt so nice after I finished this step.  I used the white gauze so I can see how much residue I am removing - once the gauze stays relatively clean,  I know I'm done with this step.  




Next was the wood conditioner.  Its like using foundation on your face before make-up.  It just prepares the new, raw wood for staining and allows it to go on smoother.  I love it.  


This Varathane stain made all the difference.  Everyone told me I couldn't make an oak door look like a deep mahogany but this totally did the trick.  The final coats went a bit thicker to enhance the color and I LOVE the result!



Living in Chicago - the final step was a definite MUST!  I added a few coats of the spar urethane.  It creates a strong clear coat to prevent chipping and peeling.  With the harsh winters, this was a must.  

 Thank you so much for stopping by and taking a look at my front door make-over!  



Linked up to the Roomspiration Linky party!
Roomspiration

9 comments:

  1. I can't believe you didn't have a flood of comments on this makeover. You did an absolutely magnificent job on that door. I can't believe it is the same door. Loving the colour, it looks so rich. Good for you... that was a big task to tackle and you aced it.

    Hugs, Deb

    ReplyDelete
  2. Thanks Deb! Probably because when I posted it I only had one follower - my sister! LOL Maybe once Spring get here I can repost it. It was a lot of work but so worth it. I was very surprised it turned out so dark. Love it.

    ReplyDelete
  3. How many coats of the gel stain did it take to get it that dark?

    ReplyDelete
    Replies
    1. Hello! Because its a gel stain, I believe it was about 3 full coats with a fourth coat added to even out the color. On the fourth coat I didn't wipe it off as much and let the color stay longer for that deep rich tone. The wood conditioner is the key so the door takes the stain in a consistent color. Good luck!

      Delete
  4. This comment has been removed by a blog administrator.

    ReplyDelete
  5. Hi, great job! I want to do this on my cabinets that are a similar color as your door. Any suggestions? do you have a list of supplies used?

    ReplyDelete
  6. Door Refinishing made Simple Are your doors suffering from exposure to weather or just normal wear and tear Contact Us For a Quote!
    Door Refinishing

    ReplyDelete

Note: Only a member of this blog may post a comment.